In-stock orders will ship in 3 business days or less after receipt of order.
Other Quantities - Contact Us.
Sold Per: EA
Estimated Shipping Weight: 6.90 lb
Stock Location: CHINO, CA
This item is built-to-order. Please contact Customer Service for Lead Time. Orders will be accepted for a minimum of 1.
The Ion Python is a point-of-use ionizer using compressed air or nitrogen to neutralize electrostatic charges from a small, defined area and/or to facilitate removal of charged particles. These ready-to-use units are designed for use in applications and areas where ElectroStatic Attraction contamination create manufacturing or handling problems (Ref: ESD Handbook TR 20.20 paragraph 188.8.131.52.2.4 Point of Use Ionization). The Ion Python meets or exceeds the recommended technical requirements of ANSI/ESD S20.20 tested in accordance with ANSI/ESD S3.1.
NOTE: Air nozzles are recommended for intermittent applications. They require filtered, dry, non-combustible gases, such as compressed shop air or nitrogen. If using nitrogen, contact the factory for modifications and adjustments needed.
“Necessary non-conductors in the environment cannot lose their electrostatic charge by attachment to ground. Ionization systems provide neutralization of charges on these necessary non-conductive items (circuit board materials and some device packages are examples of necessary non-conductors). Assessment of the ESD hazard created by electrostatic charges on the necessary nonconductors in the work place is required to ensure that appropriate actions are implemented, commensurate with risk to ESDS [ESD sensitive] items”. (ANSI/ESDS20.20-2007 Foreword)
“In order to mitigate field-induced CDM [Charged Device Model] damage, the ESD program shall include a plan for the handling of process-required insulators. If the field exceeds 2,000 volts/inch, steps shall be taken to either: A) Separate the insulator from the ESD-sensitive device by a distance of 30 cm (12 inches); or B) Use ionization or other charge mitigating techniques to neutralize the charge.” (ANSI/ESDS20.20-2007 section 8.3)
“The primary method of static charge control is direct connection to ground for conductors, static dissipative materials, and personnel. A complete static control program must also deal with isolated conductors that cannot be grounded, insulating materials (e.g., most common plastics), and moving personnel who cannot use wrist or heel straps or ESD control flooring and footwear. Air ionization is not a replacement for grounding methods. It is one component of a complete static control program. Ionizers are used when it is not possible to properly ground everything and as backup to other static control methods. In clean rooms, air ionization may be one of the few methods of static control available.” (ESD Handbook TR20.20 Ionization, section 184.108.40.206)
“All ionization devices will require periodic maintenance for proper operation. Maintenance intervals for ionizers vary widely depending on the type of ionization equipment and use environment. Critical clean room uses will generally require more frequent attention. It is important to set-up a routine schedule for ionizer service. Routine service is typically required to meet quality audit requirements.” (ESD Handbook TR 20.20 section 220.127.116.11 Maintenance / Cleaning)
"Activities that handle items that are susceptible to less than 100 volts HBM may require additional control elements or adjusted limits.” [ANSI/ESD S20.20 section 2.0]
FOOT SWITCH, REPLACEMENT
Click HERE to See Availability
FILTER, ION PYTHON REPLACEMENT
CORD, AC POWER, BLACK, 220V EURO
CORD, AC POWER, BLACK, 220V UK
CONTROLLER, ION PYTHON, FOOT SWITCH, 120VAC NIST
PULSED ION BAR CONTROLLER, ASIA
PULSED ION BAR CONTROLLER, N. AMERICA
CONTROLLER, ION BAR, LINEAR, RECESSED POT ADJUSTMENT, 120V
CONTROLLER, ION BAR, LINEAR, RECESSED POT ADJUSTMENT, 220V
ION BAR ASSEMBLY, AIR-ASSISTED 36 INCH, 12 EMITTERS
ION BAR ASSEMBLY, AIR-ASSISTED 72 INCH, 24 EMITTERS
ION BAR ASSEMBLY, AIR-ASSISTED 96 INCH, 32 EMITTERS
EMITTER, AIR-ASSISTED ION BAR
CONTROLLER, HAND GUN W/HOSE 120VAC NIST
CONTROLLER, HAND GUN W/HOSE 220VAC NIST
ION GUN, CHARGEBUSTER, 220V
ION BAR ASSEMBLY, 24 INCH, 6 EMITTERS
ION BAR ASSEMBLY, 72 INCH, 18 EMITTERS
ION BAR ASSEMBLY, AIR-ASSISTED 12 INCH, 4 EMITTERS
ION BAR ASSEMBLY, AIR-ASSISTED 24 INCH, 8 EMITTERS
CONNECTOR SET, ION BAR 2 TO 1, (2 PER PACK)
EMITTER, NON-AIR ASSISTED ION BAR